Tuesday, February 21, 2012

How to Remove Spam Virus

Viruses are destructive to computers and can terms a system in a kind of ways. Spam viruses or spyware can download multiple pop-up ads to your system that weak your computer performance and interrupt another computer functions. Spam viruses also send themselves out to other people through your e-mail. Removing spam viruses demands some industry and the proper use of anti-virus programs that can locate.

How to Remove Spam Virus

• Open your anti-virus software and click on the "Update" button on the start page. This will update your software so you gain the nearly last virus definitions.

• Disconnect your computer from the Internet by turning off your modem. Spam viruses are frequently downloading more advertizing content and more malware to the system through your Internet connection. Once your anti-virus software is updated, you need the Internet cut off until the computer virus has been erased. If you have a WiFi connection, you can right-click on the icon in the lower right corner task bar and select "disconnect." Several computers will also disable WiFi by holding down the "Fn" key and pushing "F2."

• Restart your computer and hold down F6 during start-up to initiate Safe Mode. Safe Mode should inactivate the virus temporarily, which makes it easier for the virus scanner to locate it. Viruses can cause pop-ups even when not online since the files are already downloaded, so this will also disable any pop-up ads from coming out while the computer is running since they'll all be deactivated.

• Scan your computer with your anti-virus software while it is in Safe Mode by opening the program and selecting the "Scan" option. Delete all the drooped files once the scan has finished. Most programs will do this for you when you click "Finish" but you may claim to highlight each program and click "Delete." The scan should be able to delete the pop-up ads the viruses have downloaded in addition to the virus itself.

• Restart your computer once again normally.

• Scan the computer once again. Some spam viruses require several scans to fully delete them and this second scan is just a obstructive measure to secure the virus isn't still forming up under regular conditions. If you start getting pop-up ads arising again, go back to Safe Mode and scan again.

• Connect the computer to the Internet again, formerly the virus has been removed and the scanner breaks no further hazards.

Cloud AV 2012 Virus (Uninstall Guide)

Cloud AV 2012 is a rogue antivirus program that needs to find malicious software on your computer. The rogue program disables positive Windows utilities and blocks genuine security products. It plunges itself every time on your PC is became on and pretends to scan the system for malware. It is worth referring, however, that this fake AV reports exactly the same infections on different computers: Trojan.JBS.Ghost, Trojan-Downloader.JS.Remora, Net-Worm.Win32.Kido.ih and other stuff. So, basically, Cloud AV 2012 malware is playing on your fears to try to sell you totally BS security product. If you give settled for the scam and have paid for the rogue program you should issue chargebacks through your credit card company. That's the only way to get your money back, besides, too numerous chargebacks will probably result in the merchant missing the ability to accept credit card payments. That's a good thing, isn't it? Then you need to remove Cloud AV 2012 and associated malware from your computer. To do so, please follow the removal instructions below.

Normally, such fake AVs as Cloud AV 2012 drive people nuts, specially because of never ending alerts and notifications about serious threats, etc.

Cloud AV 2012 removal instructions:

• First of all, download and run ZeroAccess/Sirefef/MAX++ removal tool. (works on 32-bit systems only! If you have 64-bit system, go to the next step)

• Then use TDSSKiller. If you can't run it (rogue av blocks it), rename tdsskiller to winlogon and run the secondary again.

• And finally, download recommended anti-malware software (Spyware Doctor) and run a full system scan to remove this virus from your computer.

If you can't download it, please reboot your computer is "Safe Mode with Networking". As the computer is booting tap the "F8 key" continuously which should work up the "Windows Advanced Options Menu" as shown below. Use your arrow keys to move to "Safe Mode with Networking" and press Enter key.

NOTE: Login as the same user you were previously logged in with in the normal Windows mode.

• To reset the Hosts file back to the default automatically, download and run Fix it and follow the steps in the Fix it wizard.

Manual Cloud AV 2012 removal guide:

• Right-click on Cloud AV 2012 icon and select Properties. Then select Shortcut tab.

The location of the malware is in the Target box.

• In our subject the malicious file was located in C:\Windows\System32 folder. Select the malicious file, rename it and change a file name extension.

Original file: Cloud AV 2012v121.exe

Renamed file: TcS22bF3nGaQWKf.vir (you may change only the file name and leave file extension .exe)

• Restart your computer. After a reboot, download free anti-malware software from the list below and run a full system scan.

• First, use TDSSKiller. Then download recommended anti-malware software (Spyware Doctor) and run a full system scan to remove this virus from your computer.

• To reset the Hosts file back to the default automatically, download and run Fix it and follow the steps in the Fix it wizard.

Manual activation and Cloud AV 2012 removal:

• Select to remove threats and manually activate the rogue program. Enter one of the following codes to activate Cloud AV 2012.


• Download recommended anti-malware software (Spyware Doctor) and run a full system scan to remove this virus from your computer.

Monday, February 20, 2012

How to Remove Boot.Tidserv Virus

Boot.Tidserv is a malicious spotting for a Master Boot Record (MBR) infected by Backdoor.Tidserv.L which is a Trojan horse that shows advertizing, redirects user search results, and opens a back door on the compromised computer. Boot.Tidserv is a detection for a variant of Tidserv Trojan that is able of infecting 64-bit Windows operating systems. Boot.Tidserv spreads its freeware executables through a fake online scanning sites and false pop-up ads that can be randomly exhibited when you browse on the web. Boot.Tidserv runs hard risks of being able to monitor your browsing activity as well as gain access to your highly private information. It’s better to remove Boot.Tidserv from your system immediately after you notice it.

“Boot.Tidserv should be removed as soon as possible. Click the “Remove this infection” button to download Boot.Tidserv removal tool.”

(During installation action of SPYWARE Doctor, you might get a warning from SPYWARE Doctor that you need to uninstall several programs before installing SPYWARE Doctor. Please Ignore that warning and select “Next” button available on that warning window to continue installation).

Boot.Tidserv Infection Symptoms

• Google, Yahoo Searches are redirected. Desktop background image and Browser homepage settings are changed. This is a familiar symptom of a very serious Boot.Tidserv infection.

• Boot.Tidserv slows down your computer well and you will feel like your computer is stuck. This lets in opening programs, shutting down your computer, and slow Internet.

• You will have many unwanted pop ups. Boot.Tidserv corrupts your windows registry and uses it to deploy annoying pop up ads out of nowhere.

How Dangerous is Boot.Tidserv Infection

This infection will change your registry settings and then significant windows system files. If Boot.Tidserv is not removed it can make a complete computer crash.

Some Boot.Tidserv infections hold trojan and keyloggers which can be used to steal confidential data like passwords, credit card, bank account information etc. So it is really important to remove Boot.Tidserv as soon as possible before it steals your information.

How To Remove Boot.Tidserv Manually

Manual removal of Boot.Tidserv Spyware is a difficult task, we recommend you to use our Automatic Spyware removal tool. This is a secure and good method. Download SPYWARE Doctor to automatically remove Boot.Tidserv.

Manual Removal Steps:

• Stop Boot.Tidserv procedure using the windows task manager.

• Uninstall Boot.Tidserv programme from windows control panel Add/Remove Programs.

• Open windows registry using regedit.exe command. Get and Remove all Boot.Tidserv Registry Files.

• Research for Boot.Tidserv Files on your computer and delete it.

Please, be informed that manual removal of Boot.Tidserv malware is a unfortunate procedure and does not always secure complete deletion of the Boot.Tidserv, since some files might be hidden or may automatically recreate themselves later.

Download Boot.Tidserv Removal Tool to automatically remove Boot.Tidserv.

Boot.Tidserv properties:

• Boot.Tidserv Changes browser settings
• Boot.Tidserv Shows commercial adverts
• Boot.Tidserv Connects itself to the internet
• Boot.Tidserv Stays resident in background

While Windows Boot.Tidserv is running, it will display a variety of fake security warnings and block official Windows applications on your computer. Some of the alerts Boot.Tidserv shows are:

Attention :

Suspicious software activity is detected by Boot.Tidserv on your computer.
Please start system files scanning for details.


Name: taskmgr.exe
Name: C:\WINDOWS\taskmgr.exe

Boot.Tidserv notices application that seems to be a key-logger. System information security is at risk. It is recommended to enable the security mode and run total System scanning.

Just like wrong scan results above, all of these alerts Boot.Tidserv shows are a fake and supposed to scare you into thinking your computer is in danger. You should ignore all of them!

As you can see, Boot.Tidserv is a scam. Most importantly, do not leverage it! Or Else of doing so, follow the removal instructions offered in our site to remove Boot.Tidserv and any connected malware from your computer.

To put it simply, you need to delete Boot.Tidserv from your computer before it make tremendous harm. Don’t believe Boot.Tidserv claims that everything will go back to normal if you produce the license for the full version of the program. You will only lose your money while the Boot.Tidserv rogue will rest in your system. Invest in a reliable security tool and remove Boot.Tidserv from your computer.

Download Boot.Tidserv Removal Tool to automatically remove Boot.Tidserv.

Unable To Download The Removal Tool or Removal Tool Not Working? Please Follow The Steps Given Below.

  • You need to restart your computer in “Safe Mode with Networking.” To do so, please restart your computer. As your computer restarts , before Windows launches, tap “F8″ key always. Use the arrow keys to highlight the “Safe Mode with Networking” option and then press ENTER. If you don’t get the Safe Mode with Networking option, please restart the computer again and keep tapping “F8″ key instantly.

  • Open Internet Explorer => Click on Tools => Click on Internet Options => In the the Internet Options window click on the Connections tab => Then click on the LAN settings button & => Uncheck the check box marked “Use a proxy server for your LAN” under the Proxy Server section and press OK.

  • (If you are using Mozilla Firefox browser then Open Firefox => Click on Tools&=>Click Options => Click Advance => Click Network => Click Settings => Check No Proxy & => Click Ok)

Click HERE to Download and Run Spyware Doctor to remove Boot.Tidserv.
(You might get a warning from Spyware Doctor that “Safe Mode Scan is not recommened”, please ignore that content and continue the scan to remove the virus. Then restart the computer in normal mode a perform a scan once again to make sure all the Boot.Tidserv infection files are gone).

Wednesday, February 15, 2012

How to Remove Google Redirect Virus

If you have ever tested to visit a specific website only to find your web browser redirecting itself to a different website without your consent, you've likely been infected with a redirect virus. This serious piece of code redirects your Web inquiries without your permission in an effort to get you to buy software that doesn't process or click on ads to give money for the people who written the virus. You can remove this virus without spending money with the help of some free software and tools.

  • Reboot your computer into Safe Mode by restarting it, pressing the "F8" key when it starts up and selecting the "Safe Mode with Networking" option.

  • Log on with an account that has administrator privileges, open a web browser and proceed to download Malwarebytes using the link in the Resources section. Malwarebytes is a highly valued free software program that will help you to remove the redirect virus from your computer.

  • Install Malwarebytes. At the end of the installation process, secure that both check boxes are checked so that it will download updates and then start up.

  • Use the Scan option to run a full system scan on your computer. Remove any infections that are seen and close the program.
  • Go to the Trend Micro House Call website. This site offers a free online virus scanner that will scan your computer through a small browser applet. Follow the instructions on the site and complete a full system scan. This scan can take different hours to complete, but once finished, remove any infections or viruses that are found.

  • Restart your computer and provide it to boot up normally. Open your Web browser and confirm that you are no longer affected by the redirect virus. If you are, perform these removal steps again. You may have to repeat these steps in several times to order and remove the virus completely, depending on what type of virus you have and how severely your system is infected.

Tuesday, February 14, 2012

How To Remove System Tool 2.20

System Tool 2.20 is the fake antivirus which should be knew for you if interested in fake anti-spywares because it comes from the same family as the famous Security Tool. System Tool 2.20 is promoted through misleading phony security websites and misleading downloads, and once it gets on your computer it shows a series of System Tool Version 2.20 pop-ups trying to scare you into giving for a nonexistent full version.System Tool 2.20 is the factor that may slip your money as well as present you with all forms of false warning messages which may appear genuine. This is all done to catch you off safety and make you genuinely believe that your PC is infected. System Tool 2.20 may use scare tactics or other aggressive marketing tactic to try to trick you into buying the certified version of System Tool 2.20 software.

Automatic System Tool 2.20 Removal In 10 Minutes

Is your PC infected with Antivirus System Tool 2.20 ? To safely & speedily detect System Tool 2.20 , we highly recommend you “Spyware Doctor”

Download Spyware Doctor to remove System Tool 2.20 in 10 minutes.

Please Note!

"If Spyware Doctor download is blocked by the virus, try a other Internet browser like Firefox, Chrome or try renaming the Spyware Doctor file to 1234.exe and then run it. If issue remains, please survey the steps given below. Please don’t forget to make a note of this website address, bookmark it or take printout as you may have to restart the computer during the spyware removal process"

Follow the Steps
  • Restart your computer. As your computer restarts but before Windows launching, tap “F8″ key constantly. Use the arrow keys to highlight the Safe Mode with Networking option and then press ENTER. If you don’t get the Safe Mode with Networking option, please restart the computer again and proceed tapping “F8″ key directly.
  • Open Internet Explorer then Click on Tools -> Click on Internet Options -> In the the Internet Options window click on the Connections tab ->Then click on the LAN settings button ->Uncheck the check box labeled “Use a proxy server for your LAN” under the Proxy Server section and press OK.
  • To Download and Run Spyware Doctor to remove System Tool 2.20 , Click Download below.

Spyware Doctor delivers powerful protection against spyware and adware threats.

Friday, February 3, 2012

How to Remove System Tool Firewall Alert

We would like to emphasize your attention on System Tool Firewall Alert. Please be familiar that this is fake pop-up alert that comes up from Windows task bar. Think that this type of alert was launched in order to fool computer users and convince them that their PC is really contaminated with virus. Later on, it will do all it can to activate System Tools 2011, which is just a typical rogue security tool which we have already identified in one of our previous posts.

Below is the example of such alert:

Extra to mention, all such alerts need to be totally disregarded, even though they seem to be quite persuasive. Thus, seek assistance from a proper anti-virus tool that can get rid of the virus that opens these alerts.

System Tool Firewall Alert automatic remover:


Thursday, February 2, 2012

How to Remove the Bleeping Computer Virus

Since the first computer virus infections were reported, one case of malware known as a Trojan has included two key characteristics: it evades a machine's security by masking itself and pretending to be something it isn't, and it uses social engineering to exploit a user's trust to remain virus-free by producing a hoax that entices the user to inadvertently activate the virus. The Bleeping computer virus is Trojan that fits this description. Once activated, it can interpose with legitimate downloads, waste your money on fraudulent fixes, and spread infection across your network. Fortunately, you can take steps to remove this virus from your computer.

Bleep Virus Removal

  • Learn about this virus before attempting to remove it. Bleep attempts to trick you into thinking your computer is infectious by generating a false Microsoft Security Alert that claims an "unknown/Win 32 Trojan" virus is in your system and encourages you to install one of the following fake antivirus programs: Red Cross Antivirus, Peak Protection 2010, Pest Detector 4.1, Major Defense Kit, and AntiSpy Safeguard. During the phony scan, only these five malware programs will express that your computer is infected. The objective is to convince you to do the expected: click on the Free Install button. However, doing so will install the rogue program, reboot the computer, and activate the virus.
  • Download RKill from Bleepingcomputer.com and run the program to disable the active virus. If the virus causes RKill to shut down, download the same software under the names iExplore.exe or eXplorer.exe and run it. It is unlikely that the virus will look for and block these versions. When RKill has terminated the virus, the black window RKill initially opened will close.
  • Clean and protect your machine with an anti-malware product. Download a free copy of Malwarebytes' Anti-Malware from the Malwarebytes.org website. Be sure to add a desktop shortcut for this program during the download process
  • Terminate all running programs and close all windows. Click on the Malwarebytes' shortcut on your desktop to install the program. As the program installs, ensure that the "Launch" and "Update" boxes remain ticked. A window will display the installer's advance as it runs; this step may take several minutes.
  • Reboot your computer, if requested. Click "OK" on the first message after the program starts. You will be affected to indicate whether you want to run a scan. Be sure that "Full Scan" is selected before you click the "Scan" button.
  • Review the program output to see a list of malware detected on your system. The list may include one or more files related to "Trojan.Fake Alert". Select all files shown in this window and click the "Remove Selected" bar on the bottom left to finished the procedure. The bleeping virus has been removed from your computer.

How to Remove System Tool

System Tool is a bad security program which is a clone of Security Tool. The programme is confidential as a rogue antispyware tool because detects numerous false infections and displays a lot of fake security alerts in order to fright you into thinking your computer in danger. It desires that you will then purchase its full version. But you should know, System Tool is unable to detect or remove any viruses, trojans, worms nor will be protect you from legitimate future security threats. Thus, you need to remove this malware from your computer as soon as possible.

SystemTool is distributed through the use of malware that pretends to be flash updates, or even video codecs wanted to watch an online movie. Formerly started, it will configure itself to run automatically when Windows starts. Next, the rogue will execute a system scan and report numerous infections to make you think that your computer is infected with trojans, spyware and other malware. Then it will prompt you to pay for a full version of System Tool to remove these threats. Of course, all of these infections are fake and don’t actually exist on your computer. So you can safely neglect them.

While SystemTool is running, it blocks the ability to run any plans, including legitimate antivirus and antispyware applications. The following warning will be shown when you try to run any program:

  • Application cannot be run. The file file name is infected.
  • Please activate your antivirus software.

More over, System Tool will display a lot of false security alerts and plug screens.

Some of the alerts:
  • System Tool Warning
  • Intercepting program that may compromise your privacy and harm your system have been detected on your PC.
  • Click here to remove them immediately with System Tool

  • System Tool
  • WARNING 23 infections found!!!
  • System Tool Warning
  • Some vital system files of your computer were modified by malicious program. It may cause system instability and data loss.

System Tool will also replace your current Windows background with a fake security warning that states:
  • Warning!
  • Your’re in Danger!
  • Your Computer is infected with Spyware!

Of course, all of these warnings and alerts are a fake and like scan wrong results should be ignored!

If your computer is infected with SystemTool, then most importantly, do not purchase it! Uninstall the rogue from your PC as soon as possible. Use the removal guide below to off System Tool and any related malware from the system for free.

Automatic removal directions for System Tool

Step 1. Reboot your computer in Safe mode with networking

Restart your computer.

After hearing your computer beep once during startup, start pressing the F8 key on your keyboard. On a computer that is configured for booting to multiple operating systems, you can press the F8 key when the Boot Menu appears.

Instead of Windows loading as normal, Windows Advanced Options menu appears similar to the one below.

When the Windows Advanced Options menu appears, select Safe mode with networking and then press ENTER.

Step 2. Remove SystemTool and any associated malware

Download MalwareBytes Anti-malware (MBAM). Close all programs and Windows on your computer.

Double Click mbam-setup.exe to install the application. When the installation starts, keep following the moves in order to proceed with the installation procedure. Do not make any changes to default settings and when the program has finished installing, make sure a checkmark is placed next to Update Malwarebytes’ Anti-Malware and Launch Malwarebytes’ Anti-Malware, then click Finish.

If an update is found, it will download and install the latest version.

Once the program has loaded you will see window similar to the one below.

Malwarebytes Anti-Malware Window

Select Perform Quick Scan, then click Scan, it will start scanning your computer for System Tool infection. This procedure can take some time, so please be patient.

When the scan is complete, click OK, then Show Results to view the results. You will see a list of infected items similar as shown below. Note: list of infected items may be several than what is shown in the image below.

Make sure all entries have a checkmark at their far left and click “Remove Selected” button to remove System Tool. MalwareBytes Anti-malware will now remove all of related SystemTool files and register keys and add them to the programs’ quarantine. When MalwareBytes Anti-malware has finished removing the infection, a log will open in Notepad and you may be prompted to Restart.

Step 3. Reset HOSTS file

System Tool will change the Windows system HOSTS file so you need reset this file with the default version for your operating system.